wordpress support forum
Cinta Sierra

Band Body: simply means the backing
Tooth: the top part which is made of high speed steel
Teeth side: the side welded with high speed which full of sharp tooth
Back: made of spring steel to resist the tension
Side: two flat sides of band
Width: from teeth top to the botom
Thickness: simply means how thick of the backing
Pitch: distance between two close teeth
Rake Angle: there always a little angle which differ the teeth types

Tooth Pitch:  Tooth pitch is defined as the number of teeth per inch (TPI)

 

Constant Pitch

The tooth distance is equally spaced, the number of teeth per inch (25.4mm) denotes the tooth of the saw blade.

 Standard Tooth

Specification Other tooth pitch Variable pitch
27×0.9 4 2/3，3/4，4/6，5/8
34×1.1   2/3，3/4，4/6，5/8
41×1.3   2/3，3/4，4/6
Scope of use
Constituted by the front, back and tooth bottom arc the cogging toothed. Are widely used in band saw blades, small pitch. Constituted by the front, back and tooth bottom arc the cogging toothed. Are widely used in band saw blades, small pitch. Bi-metal band saw blades range should be read in conjunction with cutting workpiece, considering the saw blade specifications, toothed, pitch and other factors.For details, please refer to:Bi-metal band saw blade cutting parameters selection table，The bi-metal band saw blade tooth pitch selection

 

Turtle Tooth

Specification Other tooth pitch Variable pitch
27×0.9   3/4，4/6
34×1.1   2/3，3/4，4/6
41×1.3   2/3，3/4，4/6
Scope of use
After the angle is small, followed by a plane and the projection of the arc, and in order to improve the intensity of tooth portions. Applicable to medium pitch band saw blades.Bi-metal band saw blades range should be read in conjunction with cutting workpiece, considering the saw blade specifications, toothed, pitch and other factors.For details, pleaserefer to:Bi-metal band saw blade cutting parameters selection table，The bi-metal band saw blade tooth pitch selection

 

Tensile Tooth

Specification Other tooth pitch Variable pitch
27×0.9   3/4，4/6
34×1.1   3/4，4/6
41×1.3   3/4，4/6
54×1.6   3/4
Scope of use
Similar to a combination of standard tooth and Turtle teeth, sharp teeth sharp and high intensity tooth back. Band saw blades suitable for small to medium pitch. Cutting thin wall tubing, profiles plus.Bi-metal band saw blades range should be read in conjunction with cutting workpiece, considering the saw blade specifications, toothed, pitch and other factors.  For details, please refer to:Bi-metal band saw blade cutting parameters selection table，The bi-metal band saw blade tooth pitch selection

 

Jump Tooth

Specification Other tooth pitch Variable pitch
54×1.6   1.0/1.5
67×1.6   1.0/1.5
80×1.6   1.0/1.5
Scope of use
The basic shape of the sawtooth standard teeth, but the removal of every white teeth. Applicable to a wide specification, large tooth pitch band saw blade.Bi-metal band saw blades range should be read in conjunction with cutting workpiece, considering the saw blade specifications, toothed, pitch and other factors. For details, please refer to:Bi-metal band saw blades cutting parameters selection table，Bimetal strip select the tooth pitch of the saw blade

Dual-rear corner Tooth

Specification Other tooth pitch Variable pitch
27×0.9   2/3，3/4
34×1.1   2/3，3/4
41×1.3   1.4/2.0，2/3，3/4
54×1.6   0.85/1.3，1.4/2.0，2/3，3/4
67×1.6   0.75/1.0，0.85/1.3，1.4/2.0
80×1.6   0.75/1.0，0.85/1.3
Scope of use
Constituted by two rear corner behind the toothed, the tooth portion has a higher strength. Applicable to medium pitch, larger pitch band saw blades.  Bi-metal band saw blades range should be read in conjunction with cutting workpiece, considering the saw blade specifications, toothed, pitch and other factors. For details, please refer to:Bi-metal band saw blade cutting parameters selection table，The bi-metal band saw blade tooth pitch selection
Fleje

MODELO

TAMAÑO

 

19X2.0,19X2.5,19X3.0

32X2.0,32X2.5,32X3.0

50X2.5,50X3.0

19X2.0,19X2.5,19X3.0

32X2.0,32X2.5

19X2.0,19X2.5,19X3.0

32X2.0,32X2.5,32X3.0

19X2.0,19X2.5,19X3.0

 

19X3.0,32X2.5,32X3.0

19X2.5,19X3.0,32X2.5,32X3.0

USO PRINCIPAL

 

Tablero de fibra, botas de cuero genuino, zapatos de cuero genuino, tablero duro, cuero de imitación, muebles de cuero, guantes de cuero, bolso de cuero, cordones de cuero, maleta de cuero

 

Botas de cuero genuino, zapatos de cuero genuino, piel de imitación

 

 

Asbestos Cuerda retorcida, cordones de Eather, juntas de fibra de vidrio, cuero de escamas, latex de formación, muebles de cuero, guantes de cuero, bolso de cuero, maleta de cuero, forro, monocapa papel abrasivo, Junta de caucho monocapa, caucho, juntas de caucho, seda, esponja de goma

 

Botas de cuero genuino, zapatos de cuero genuino, piel de imitación

 

Tablero de control de Autocar, materiales de amortiguación de Autocar, tableros de Autocar, Autocar tejido de algodón, cartón, corchos, tablero de fibra, fibra de vidrio papel de aluminio, malla de fibra de vidrio, tablero duro, LinerMulti-capa de plástico Hoja, juguetes de peluche, madera contrachapada, Materiales de aislamiento dentro de las máquinas, guantes de tejido

 

Tablero de control de Autocar, los paneles de Autocar, algodon tejido de Autocar, telas de la fibra del poliester

Broca

Boquilloa Punto Chato Punto fino Salida por detrás

 

 

 

Un filo y dos filos

 Un filo y dos filos Un filo y dos filos Un filo
Pleca

PLECA PARA DOBLAR:

23MMX2 PT (0.71mm)

23MMX3 PT (1.05mm)

23.3MMX2 PT (0.71mm)

23.3MMX3 PT (1.05mm)

PLECA PARA CORTE:

23.8MMX2 PT（0.71mm)

23.8MMX3 PT (1.05mm)

23.8MMX4 PT (1.42mm)

31.75MMX2 PT (0.71mm)

31.75MMX3 PT (1.05mm)

31.75MMX4 PT (1.42mm)

Pasta

MATERIAL: PP Y PEC

COLOR: BLANCA, NEGRA

MEDIDAS:

45X90X1” / 45X90X2” / 160X50X1” / 160X50X2”

DUREZA: 85/90